Refine your search

The results of your search are listed below alongside the search terms you entered on the previous page. You can refine your search by amending any of the parameters in the form and resubmitting it.

Select all Deselect all Add selection to lightbox
Large Small
Thumbnails per page
Located four kilometres north of Bhaktapur at the end of a high ridge (1,677 metres), the temple of Changu Narayan is one of the oldest in the Kathmandu Valley, and the most sacred to worshippers of Vishnu.<br/><br/> The original construction of Changu Narayan, or Vishnu of the Moving Hill, is attributed to Licchavi king Hari Datta Varma around 325 CE. The earliest inscription found dates back to the year 464 in the reign of King Manadeva I, but there are indications that the temple must have existed long before.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.
Woodcarvings have been an integral part of houses and temples in Nepal since the 12th century and the art reached its peak during the 15th and 16th centuries CE. Wood being an abundant raw material, woodcarvings were simply everywhere: wooden doors, windows, cornices, pillars, struts or beams in Newar houses were all adorned with complex ornamental patterns. Temples, too, received a generous share of attention, but here, naturally, religious motifs were dominant.<br/><br/> The woods of various trees were employed, including sisu, champa, deodar, haldu and teak; but the most favoured wood was that of the sal tree. The sal tree (<i>Shorea robusta</i>), formerly found in abundance in the Tarai and the valleys of the higher mountain ranges, provided the most hardy of Nepalese woods, reputed to last a thousand years, whether exposed to air or water, or for that matter, termites. Growing to a majestic height of 30-40 metres, a single tree would provide the carvers with an enormous amount of raw material.<br/><br/> On a spiritual level, sal was supposedly favoured by Vishnu and inhabited by a spirit, which, if worshipped, granted rain. In some villages, sal was revered as the dwelling place of Van Devi, the 'Goddess of the Forests', to whom offerings were made. Since the construction of a temple warranted only the best material, wood from the tall sal tree was often employed. Sal wood allowed temples to survive many centuries, through hundreds of monsoons and the occasional earthquake.